|
3Dstuffmaker a division of Iprint Technologies sets new standards and provides a highly cost-efficient means of producing numerous designs through its various models. They are used extensively by Inventors, Designers, Engineers and by Educators and also popular among robotics, toy and model makers.
Cannonball Allstar is our premium upgraded professional 3D printer, nicely built and awesome design (transparency) acrylic finish includes large print area (200X200X100 mm), PLA compatible, standard 0.4mm nozzle, eazy printing software and much more..
Why should you buy allstar?
If you are professional, inventor, construction/cadd engineer, models seller who is looking for professional 3d printer which prints large 3d printed parts, toys, models, .etc
Prints high quality parts (0.2-0.4mm print accuracy) at most affordable price.
Transparent acrylic design and clean process makes ideal for any office environment.
Accurate enough for serious work and simple enough for fun and hobby.
Eco-friendly, non-hazardous print material. (PLA)
Easily exchangeable print plates , extruders and nozzles.
Requires minimal training and expertise.
Price : 1999 AUD
Working of Allstar:
The Movements on Allstar is controlled by 3.5 Kg.cm Steppers and Timing Belt of 5.08 Pitch with corresponding pulleys is used here, Smooth movement of X, Y and Z axis is preconfigured in factory, correct calibration is made for Accurate Movements of X, Y and Z axes Steppers.
The Machine Requires 12 DC 5 Amps power supply to power on the Printer, needs USB A-B cable to connect and Interact with PC, Gen6 Electronics is used here with our standard and easy print software, thus make 3d printed Parts with Accuracy and highly Reliable. It can produce Shell printing, Linear, Line printing results in Top Quality 3D Printing. Print speed may be variable according to the Prints you required.
Video Demo
http://www.youtube.com/watch?v=1cOs8k801xs&feature=player_embedded
Advantages of Allstar:
Allstar is designed for low maintenance system, which requires only minimal maintenance.The usual tool precautions apply to our 3d printers. Treat it with respect and it will perform at it’s peak. For lubrication, just wipe bearing shafts with a soft, light, soft cloth every month, to keep them shiny. Put a drop of light sewing machine-type oil on yzy threaded rods and slide bearings every month. Hot end tip life depends on proper heat regulation. Printing stuff in 3D is far from a simple consumer experience. You need skills in CAD design, 3D print preparation and learn how to optimize the system settings to achieve top print results. We however build our Allstar to cater for tech savvy designers, inventors and hobbyists who want something that can get close or equal to comparable, professional 3d printers, using smarts, a little tweaking and printing experience.For best life, simply run the hot end at the lowest possible temperature. Heating elements and extrusion tips can be replaced and repaired or just new ones screwed on. Buy our inexpensive propitiatory specially mixed PLA for best print head life. The printer box is very tough and should keep it’s calibration well. Re-calibration is however quite easy.
Warranty and Service Assistance:
We warrant that you will receive a tested and working unit or complete kit and that it left the factory only after extensive testing. If you do have an issue- just contact our Skype video support team for assistance. We are happy to ship spare parts free if parts fail due to faulty manufacture as well as we offer technical assistance and a broad range of spare parts, to keep you printing. We do not accept any claims which go beyond what is offered above. Wear and tear item and abuse are not covered.
Warranty Exclusions*:
The printing hot end is actually hot. Using this devise is like using a solder hot iron- safety precautions are needed for its safe operation. This unit is not a toy. It is a tool – and like any other tool adult safety sense and or child/student supervision is needed to operate it safely.
*we reserve the right to upgrade/change these specifications at any time.
Due to difficulties caused by customs in some countries, the power supply unit is not included with the kit. You need to get a local 5Amp 12 volt DC power supply (about $20).
Contact Seller for more special offer :
Iprint Technologies Pty Ltd.
476 High Street
Penrith NSW 2750
Australia
www.3dstuffmaker.com
Sales Enquiries: sales@3dstuffmaker.com
Technical Support: support@3dstuffmaker.com
Telephone : +61 247 213386
|
