China Gear Pump emphasizes: KCB gear pump motor must pay attention to whether the line is correct when it is connected to the power supply, otherwise the motor will reverse, which will not only burn the motor, but also bring huge damage to the gear pump, the gear will fall off. The damage of the mechanical seal and the wear of the thrust plate remind the users of the gear pump, and must pay attention before the pump works.
The KCB gear pump has a well-designed oil drain and oil return groove, which is the smallest torque force that the gear can withstand during operation. Therefore, the bearing load is small, the wear is small, and the pump efficiency is high.
The KCB gear pump is equipped with a safety valve as overload protection. The full return pressure of the safety valve is 1.5 times the rated pressure of the pump. It can also be adjusted according to actual needs within the allowable discharge pressure range. However, note that this safety valve cannot be used for long-term work of the pressure reducing valve. It can be installed separately on the pipeline when needed.
From the outboard end of the spindle to the pump, the KCB300 gear pump rotates clockwise.