1.Model Selection
Model WAN LAN RS485 Uplink Downlink
BE111 1 1 2 Modbus RTU, Modbus TCP IEC104, DL/T645, Modbus RTU,
Modbus TCP
BE111P 1 1 6
BE112 1 1 2 OPC UA IEC104, DL/T645, Modbus RTU,
Modbus TCP
BE112P 1 1 6
BE113 1 1 2 MQTT IEC104, DL/T645, Modbus RTU,
Modbus TCP
BE113P 1 1 6
BE115 1 1 2 Modbus RTU, Modbus TCP, OPC UA, MQTT, IEC104 DL/T645, IEC104, PLC, Modbus RTU, Modbus TCP
BE115P 1 1 6
2.Overview
BE11 series Energy & Photovoltaics Protocol Gateways performs as industrial protocol converters, the gateways support IEC104, DL/T645, Siemens PLC, Mitsubishi PLC, Omron PLC, Delta PLC, BACnet/IP, BACnet MS/TP, Modbus RTU , Modbus TCP to OPC UA, Modbus RTU , Modbus TCP, IEC104, MQTT, Huawei Cloud IoT, AWS IoT, Ali Cloud IoT, ThingsBoard, with Ethernet, 4G, WiFi, and RS485 support, it offers versatile connectivity for diverse IoT applications.
3.Features
Downlink supports: IEC104, DL/T645, Siemens PLC, Mitsubishi PLC, Omron PLC, Delta PLC, BACnet/IP, BACnet MS/TP, Modbus RTU Master, Modbus TCP Master.
Uplink supports: OPC UA, Modbus RTU , Modbus TCP, IEC104, MQTT, Huawei Cloud IoT, AWS IoT, Ali Cloud IoT, ThingsBoard, BLIIOT Cloud.
DC 9-36V power supply with terminal wiring. Power input with reverse wiring prevention protection.
2CH or 6CH RS485/RS232.
Serial port baud rate supports 2400bps-115200bps; Stop bit supports 1, 2; Data bit supports 7, 8; Parity bit supports None, Odd, Even.
2 RJ45 Ethernet ports, 1WAN+1LAN. Data can be collected directly from devices or from devices on cascade switches via WAN and LAN ports. It comes with link and data indicators. Built-in isolation transformer for up to 2KV electromagnetic insulation.
Support routing function.
Support PLC remote debugging upload and download.
Support to view the status information of chip temperature, memory, network port device, serial port device, etc.
Supports OpenVPN.
Support BLRMS for remote configuration, remote firmware upgrade for easy remote maintenance.
Supports Modbus RTU to Modbus TCP, transparent transmission.
Support SNMPV1/V2
Use RESET button to restore factory settings (long press in power-on state until RUN indicator goes out).
Support hardware and software watchdogs.
Support scheduled restart.
Plastic housing, IP30 protection.
Dimension 30mmx83mmx110mm(Models with 2CH serial ports), 40mmx83mmx110mm(Models with 6CH serial ports).
DIN rail mounting or wall mounting.
4.Technical Parameter
Parameter Description
System Processor Clock speed 300Mhz
Storage 128MB
Flash Memory 64MB
Power Supply Input Voltage DC 9~36V
Power Consumption Normal: 70mA@12V, Max: 168mA@12V
Wiring Anti-reverse connection protection
Ethernet Port Specification 2 x RJ45, 10/100Mbps, adaptive MDI/MDIX
Protection ESD: ±6kV(Contact), ±8kV(Air)
EFT: 1kV, 5kHz
Serial Port QTY 6CH RS485/RS232
Baud Rate 2400bps-115200bps
Data Bit 7, 8
Parity Bit None, Even, Odd
Stop Bit 1, 2
Protection ESD: ±6kV(Contact), ±8kV(Air)
SURGE ±1kV, 8/20us
EFT: 1kV, 5kHz
SIM Card Slot QTY 1
Specification Drawer type, support 1.8V/3V SIM/UIM card(NANO)
Protection Built-in 15KV ESD protection
USB Port QTY 1xMini USB
Protection Over current protection
4G
(Optional) Antenna QTY 1
Antenna Type SMA Hole
L-E Version GSM/EDGE:900, 1800MHz
WCDMA:B1, B5, B8
FDD-LTE:B1, B3, B5, B7, B8, B20
TDD-LTE:B38, B40, B41
L-CE Version GSM/EDGE:900, 1800MHz
WCDMA:B1, B8
TD-SCDMA:B34, B39
FDD-LTE:B1, B3, B8
TDD-LTE:B38, B39, B40, B41
L-A Version WCDMA:B2, B4, B5
FDD-LTE:B2, B4, B12
L-AU Version GSM/EDGE:850, 900, 1800MHz
WCDMA:B1, B2, B5, B8
FDD-LTE:B1, B3, B4, B5, B7, B8, B28
TDD-LTE:B40
L-AF Version WCDMA:B2, B4, B5
FDD-LTE:B2, B4, B5, B12, B13, B14, B66, B71
CAT-1 Version GSM:900, 1800
FDD-LTE:B1, B3, B5, B8
TDD-LTE:B34, B38, B39, B40, B41
GPS
(Optional) Antenna QTY 1
Antenna Type SMA Hole
Tracking Sensitivity > -148 dBm
Flat Position Precision 2.5m
Protocol NMEA-0183 V2.3
WiFi
(Optional) QTY 1
Type SMA
Protocol 802.11a/b/g/n (mixed)
Mode Client Mode
Channel 2.4G Channel 1 - 13,5G Channel 36 - 165
Security Open, WPA, WPA2
Encrypted AES, TKIP, TKIPAES
Speed 150Mbps (Max)
Distance Unobstructed/open outdoor coverage up to 20 meters
SSID broadcast switch Support
Indicator PWR Always on when device powered on
RUN Flickering when system running
Off when system shutdown
LINK Flickering when Ethernet communication; Always on when 4G or WiFi communication; OFF when Ethernet, 4G, WiFi are
all disconnected.
Software Internet Protocol IPV4, TCP/UDP, DHCP, DNS, etc
IP Retrieving Static IP/DHCP
Transparent Transmission Support
DNS Support Domain Name resolution
Configuration PC software configuration, support WIN XP, WIN 7, WIN 8 & WIN 10
Network Cache Transmitting: 8Kbyte; Receiving: 8Kbyte
Login Package Support custom login package
Heartbeat Package Support custom heartbeat package
Others MTBF
|
|